Neck build – April 2020

Posted on April 27, 2020 by gryder
Roughed out the 12mm MDF on a bandsaw, then double sided taped on the CNC’d headstock template. CNC template has 0.5mm added all around for sanding.

Target is 41.3mm at nut, 54.5mm at 22nd. Body join at 16.th fret (or there abouts)
Routed the 12mm template to match the CNC’d one. The transition from the CNC template to the straight edge was no perfect.
Bandsaw most of the way
I went pretty close on the bandsaw. It’s quite a wide blade, so couldn’t get in as close on the inner curves (well with my talent level)
This entry was posted in Guitar Four. Bookmark the permalink.