Builds
Old Posts
- July 2020
- June 2020
- May 2020
- April 2020
- October 2016
- September 2016
- August 2016
- July 2016
- June 2016
- March 2015
- December 2014
- November 2013
- October 2013
- July 2013
- June 2013
- May 2013
- April 2013
- March 2013
- November 2012
- October 2012
- June 2012
- May 2012
- April 2012
- March 2012
- October 2011
- September 2011
- July 2011
- May 2011
- October 2010
- September 2010
- July 2010
- June 2010
- May 2010
- April 2010
- March 2010
Category Archives: SpeakerCab
Speaker Added (1/2 Size) – Nov 2013
Posted in SpeakerCab
Comments Off on Speaker Added (1/2 Size) – Nov 2013
3 inch speaker – Oct 2013
Quick update, 3″ speaker has been removed and a 3.5mm mono jack fitted to it. Next I need to cut the baffle and fit it.
Posted in SpeakerCab
Comments Off on 3 inch speaker – Oct 2013
Half Size – Oct 2013
While waiting for the parts to arrive for my 1/4 sized cab, I started my 1/2 sized version. I decided to pop home via a DIY store and pickup some 12mm hardwood ply. I drew out the plans onto the … Continue reading
Posted in SpeakerCab
Comments Off on Half Size – Oct 2013
Box – Oct 2013
The box is glued together. For the real thing, I will need around 4 clamps of sufficient length. At this scale some small weights and a little clamp did the job well enough. Vertical batons are needed, however the dark/rain … Continue reading
Posted in SpeakerCab
Comments Off on Box – Oct 2013
Parts cut – Oct 2013
A band saw is a little overkill for this job, however it is the only thing I have with a fence, so off to the band saw it went. 10mins later, this is the end result (held together by friction). … Continue reading
Posted in SpeakerCab
Comments Off on Parts cut – Oct 2013
Marshall MS-2 Insides – Oct 2013
Taking the back of the MS-2, my plan is to remove the speaker and move into the next cab. If it goes well, I may rehouse the rest of the components into a little head – depending on time.
Posted in SpeakerCab
Comments Off on Marshall MS-2 Insides – Oct 2013
Cabinet Build – Oct 2013
I’ve decided to make a 1×12 speaker cabinet next. Due to their size, I’m going to practice on a few scale versions. First up is taking a Marshall MS-2 and turning it into a little head / cab. It has … Continue reading
Posted in SpeakerCab
Comments Off on Cabinet Build – Oct 2013